[PROTOCOL MANAGER]
  DRIVERNAME = PROTMAN$
[MDAPI]
  DRIVERNAME = MDAPI$
  BINDINGS = "DEC"
[DEC]
; protocol.ini section for the DEC EWRK3 Adapter Card
;    IOADDRESS = 0x300
;    DRIVERNAME = EWRK3$
    ; DRIVERNAME = DE450$
DRIVERNAME=DE500$
FULL_DUPLEX=ON
PCI_CARD=1
SPEED=100
CAPTURE_EFFECT=1
BURST_LENGTH=32
FLAGS=0

[PROTOCOL MANAGER]
  DRIVERNAME = PROTMAN$
[MDAPI]
  DRIVERNAME = MDAPI$
  BINDINGS = "DEC"
[DEC]
; protocol.ini section for the 100/56k pci
; DRIVERNAME = FEM556$
; PCMCIA_ENABLER=YES
; RINGSPEED=16
; IOADDRESS = 0x300
DRIVERNAME = e100b$
;  DRIVERNAME = DEFPA$ 
;  DRIVERNAME = DE450$
;  DRIVERNAME=DE500$
;  FULL_DUPLEX=ON 
;  PCI_CARD=1
;  SPEED=100
;  CAPTURE_EFFECT=1
;  BURST_LENGTH=32
;  FLAGS=0

@ECHO OFF
PROMPT $p$g
SET TEMP=C:\DOS
set path=a:\;c:\;c:\dos;c:\mouse;c:\nwclient
GOTO %CONFIG%
:100MB_FULLDUPLEX_de500_NIC
copy a:\100mbFd.ptl a:\protocol.ini /Y
GOTO BIND_NET
:3COM_TLNK3_NIC 
copy a:\tlnk3.ptl a:\protocol.ini /Y
GOTO BIND_NET
:TR_MADGE_NIC 
copy a:\madge.ptl a:\protocol.ini /Y
GOTO BIND_NET
:100_elnkpc   
copy a:\fem556.ptl a:\protocol.ini /Y
GOTO BIND_NET
:ibm_token
copy a:\ibmtok.ptl a:\protocol.ini /Y
GOTO BIND_NET
:100MB_intel
copy a:\e100b.ptl a:\protocol.ini /Y
GOTO BIND_NET
:elnkpc
copy a:\elpc3.ptl a:\protocol.ini /Y
GOTO BIND_NET
:DEFPA_NIC
copy a:\defpa.ptl a:\protocol.ini /Y
GOTO BIND_NET
:olicom_token 
copy a:\olitokr.ptl a:\protocol.ini /Y
GOTO BIND_NET
:BIND_NET
REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES ===== LANMAN 2.0 ====
ECHO.
NETBIND
ECHO.
REM ====== LANMAN 2.0 === DO NOT MODIFY BETWEEN THESE LINES ===== LANMAN 2.0 ====
IF NOT ERRORLEVEL 1 GOTO REPEAT
ECHO.
echo  ----------------------------------------------------------------------
echo  The NIC Device Driver you selected was not the one specified at boot
echo  within the protocol.ini file; or the NIC Card Adapter type specified
echo  is not the correct one installed. You must Reboot again and select the 
echo  appropriate one for NETBIND to function properly.
echo  ----------------------------------------------------------------------
ECHO.
ECHO.
ECHO A REBOOT
ECHO B FIX MANUALLY
ECHO.
CHOICE /C:AB CHOOSE AN OPTION
IF ERRORLEVEL 2 GOTO REPEAT
IF ERRORLEVEL 1 REBOOT.COM
ECHO.
:REPEAT
ECHO.   
ECHO A NET_BUSTER
ECHO B BURST_SENDER
ECHO C PACKET_SENDER (MATCH MAC ID W/ RECEIVER)
ECHO D PACKET_RECEIVER (MATCH MAC ID W/ SENDER)
ECHO E SNIFFER
ECHO F ANALYSIS
ECHO G MASTER_MULTIPLE_PROTOCOL_CONFIG
ECHO H SLAVE_MULTIPLE_PROTOCOL_TX/RX
ECHO I PROTOCOL_SENDER
ECHO J PROT_RECEIVER
ECHO K EXIT
ECHO.   
CHOICE /C:ABCDEFGHIJK CHOOSE AN OPTION
IF ERRORLEVEL 11 GOTO END
IF ERRORLEVEL 10 GOTO PROT_RECEIVER
IF ERRORLEVEL 9  GOTO PROTOCOL_SENDER
IF ERRORLEVEL 8  GOTO SLAVE_TX_RX
IF ERRORLEVEL 7  GOTO MASTER_CONFIG
IF ERRORLEVEL 6  GOTO ANALYSIS
IF ERRORLEVEL 5  GOTO SNIFFER
IF ERRORLEVEL 4  GOTO PACKET_RECEIVER
IF ERRORLEVEL 3  GOTO PACKET_SENDER
IF ERRORLEVEL 2  GOTO BURST_SENDER
IF ERRORLEVEL 1  GOTO NET_BUSTER
:NET_BUSTER
c:
cd \netbreak\buster
netbust
echo.
GOTO REPEAT
:BURST_SENDER
c:
cd \netbreak\burst
burstman
echo.
GOTO REPEAT
:PACKET_SENDER
c:
cd \netbreak\packet
packetTX
echo.
GOTO REPEAT
:PACKET_RECEIVER
c:
cd \netbreak\packet
packetRX /R
echo.
GOTO REPEAT
:SNIFFER
c:
cd \netbreak\sniffer
sniffer
echo.
GOTO REPEAT
:ANALYSIS
c:
cd \netbreak\analysis
analysis
echo.
GOTO REPEAT
:MASTER_CONFIG
c:
cd \netbreak\master
master
echo.
GOTO REPEAT
:SLAVE_TX_RX
c:
cd \netbreak\slave
slave
echo.
GOTO REPEAT
:PROTOCOL_SENDER
c:
cd \netbreak\Protocol
prottx
echo.
GOTO REPEAT
:PROT_RECEIVER
c:
cd \netbreak\protocol
protrx
echo.
GOTO REPEAT
:END
cd \
 

[MENU]
MENUCOLOR=1,7
MENUITEM=100MB_FULL_DUPLEX_de500_NIC 
MENUITEM=3com590_NIC 
MENUITEM=DE450_FULL_DUPLEX_NIC 
MENUITEM=100_elnkpc
MENUITEM=100MB_HALF_DUPLEX_de500_NIC
MENUITEM=100MB_intel
MENUITEM=elnkpc
MENUITEM=DEFPA_NIC
MENUITEM=ELNK3_NIC 
[COMMON]
DEVICE=A:\HIMEM.SYS
DOS=HIGH
DOS=UMB
BUFFERS=15,0
FILES=40
FCBS=4,0
LASTDRIVE=Z
STACKS=9,256
DEVICE=A:\SETVER.EXE
DEVICE=A:\PROTMAN.DOS /i:A:\
[100MB_FULL_DUPLEX_de500_NIC] 
DEVICE=A:\de500.dos
[3com590_NIC] 
DEVICE=A:\el90x.dos
[DE450_FULL_DUPLEX_NIC] 
DEVICE=A:\de450.dos
[100_elnkpc]   
DEvice=a:\fmenable.exe
DEVICE=A:\fem556n2.dos
[100MB_HALF_DUPLEX_de500_NIC]
DEVICE=A:\de500.dos
[100MB_intel]
DEVICE=A:\e100b.dos
[elnkpc]
DEVICE=A:\elpc3.dos
[DEFPA_NIC] 
DEVICE=a:\defpa.dos
[ELNK3_NIC]
DEVICE=a:\elnk3.dos
[COMMON]
DEVICE=A:\MDAPI.DOS